If you've just picked up a new HOBBYWING ESC, and your older program device does not work, they may not be compatible.
Older models of various program (tuning) devices, often will not work with ESCs released after that tuner/program device was discontinued.
Due to file size or latency issues the older 2-1 LCD Program Box, or the Multifunction LCD Program Box that has the Micro USB plug, and White Lettering, does not work with the more recent ESC releases.
The same is true of the Wifi Express. It does not work with modern ESC's released since it was discontinued.
Unfortunately, the older devices cannot be updated to work with the newer model ESCs. If the programming works these devices should NOT be used to flash any firmware on ESC's.
ESC's released since 2020 typically require the new Multifunction LCD Program Box G2, or the OTA Bluetooth Module. . The newer LCD Box has USB-C plug, and Blue Lettering on the case.
Not all ESC's are compatible with each program/tuner device. Review your ESC's manual as it will show what tuner device your ESC is compatible with.
Many of the more cost effective models, only work with the LCD Program Card.
To see the full list of what programmers are compatible with each ESC please see the link below.
Comments
0 comments
Article is closed for comments.