Q.
I recently purchased a HobbyWing Platinum 60 4v ESC. I am a new user to HobbyWing products. For many years I have only used Castle Creation escs on my helicopters. I have a growing fleet of helicopters, and I wanted to give HobbyWing a try, because I have heard great things from others, about its products on the field.
I have a Align T-Rex 450L Dominator Heli, which uses governor setup in iKON/Brain FBL, (not in HobbyWing Platinum 60 4v ESC) running between 3,100 and 3,400 rpm.
- What is the settings for HobbyWing Platinum 60 4v ESC, if I am using iKON gov.?
- Or, should I set it to Fix wing aircraft in the HW ESC?
The electronics on the heli are as follows:
- Three (3) cyclic servos-Savox SH-0237MG
- One (1) tail servo-Align DS525M, motor-Align 460MX Brushless (1800KV)
- Futaba S-Bus receiver
- iKON/Brain Fly Bar-Less unit
- TX is Futaba T8FG Super radio
Answer:
The settings for the ESC going through Ikon/Brain gov is
- Heli linear mode, active freewheel off, and LVC disabled.
- Set ikon to user preference.
Comments
0 comments
Please sign in to leave a comment.