Q.
I have a question regarding a very nonlinear throttle response with a new Platinum PRO v4 130A-HV-OPTO esc. I have it installed in a Freewing 90mm EDF jet converting it to an 8s system with a 90mm 12-Blade EDF 8S 4075-1390kV Inrunner Motor from Freewing - E72211. I have the LCD program box and have set the esc to fixed-wing mode. When testing in the aircraft after throttle calibration the throttle response is very nonlinear, with very little on 0-40%.also noticed if your running at anything above 50% and reduce throttle to 0 and then quickly apply throttle, there is a huge delay! This model can not be operated like this. Any ideas or suggestion?
Guru:
1) set the ESC Flight mode to Fixed-wing .
2) Calibrate throttle stroke
In this way, the response of the throttle at 0-100% is consistent.
Comments
0 comments
Please sign in to leave a comment.